ClareControls CH-THSTAT-W Guide de l'utilisateur télécharger pdf (Page 31)

Clare Controls IP Network Camera User Guide 23

Operating PTZ control

In the live view interface, use the PTZ control buttons to realize pan/tilt/zoom control of

the camera.

To realize PTZ control, the camera connected to the network must support the PTZ

function or a pan/tilt unit must be installed on the camera. Properly set the PTZ

parameters on RS-485 settings page.

PTZ control panel

To control PTZ:

1. On the live view page, click to show the PTZ control panel and to hide it.

2. Click the direction buttons to control the pan/tilt movements.

3. Click the zoom/iris/focus buttons to realize lens control.

Note: There are 8 direction arrows ( , , , , , , , ) in the live view

window.

Table 2: Description of the PTZ control panel

Icon

Description

Zoom in/out

Focus near/far

Iris open/close

Light on/off

Wiper on/off

One-touch focus

Initialize lens

Pan/tilt speed

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 91 92

Pas de commentaire

ClareControls CH-THSTAT-W Guide de l'utilisateur Page 31